Deutsch
English

Example 28

Hot Bar Soldering System (Inline-edition) with two working stations.

Adaptation to a Bosch linear transfer system.

The transport of the jigs is from the left to the right with automatic indexing of the jigs in the stations.

The products placed on the jigs are soldered in two separate stations.

The first Hot Bar Soldering station is equipped with one soldering bar, the second station has two soldering bars.

Each soldering bar is controlled separately and, therefore, can be set depending on different product specifications.

Path sensors on each soldering unit measure the height of the products and detect the sinking paths of the soldering bars into the melting soldering pot.

System is equipped with possibilities for communication and data logging (traceability).

Hot Bar Soldering - Example 28
Product Images
  • Example 28Example 28
  • Example 28Example 28
  • Example 28Example 28

Example 20

Hot Bar Soldering System with quadruple rotary table.

Stand-alone-design

Diameter of turntable: 700mm

Designed a seated working position.

Turntable is divided in 4 stations:

1. Manual station
2. Flux application
3. Hot Bar Soldering station
4. Camera system AOI

Hot Bar Soldering - Example 20
Product Images
  • Example 20Example 20
  • Example 20Example 20
  • Example 20Example 20

Example 21

Hot Bar Soldering System for the integration in a customized production system.

Double flux and double soldering unit for the integration in a rotary table design.

The whole system is attached to an x-axis.

At first the flux units are moved above the products for the flux application.

The soldering units are then moved to their process positions. If a nest on the jig is not loaded no process will take place.

System is a completely independent unit with separate control and communication to the main installation.

Hot Bar Soldering - Example 21
Product Images
  • Example 21Example 21
  • Example 21Example 21
  • Example 21Example 21

Example 22

Hot Bar Soldering System with sliding table - Designed as seated work position.

Jig on the sliding table.

Dimensions of sliding table: 200x300mm

The workpiece holder can be loaded when the sliding table is withdrawn.

Manual movement of the sliding table.

The table is locked automatically and the Hot Bar Soldering process is initiated.

Hot Bar Soldering - Example 22
Product Images
  • Example 22Example 22
  • Example 22Example 22
  • Example 22Example 22

Example 23

Hot Bar Soldering System with rotary table (Desktop-Edition).

On the turntable of the system there are two product jigs.

Diameter of turntable: 300mm.

Simultaneous loading / unloading and soldering.

Turntable can be turned manually.

Option: Automatic drive.

Soldering bar with Kapton foil feeder.

A basic camera system supports the operator when inserting the products into the jig.

Hot Bar Soldering - Example 23
Product Images
  • Example 23Example 23
  • Example 23Example 23
  • Example 23Example 23

Example 24

Hot Bar Soldering System for the integration in a customized production system (rotary indexing table).

The complete unit is suspended on a z-axis.

System is a completely independent unit with separate control and communication to the main installation.

Hot Bar Soldering - Example 24
Product Images
  • Example 24Example 24
  • Example 24Example 24
  • Example 24Example 24
Beispiel
Example 20
Example 21
Example 22
Example 23
Example 24
Beispiel

25 / 29

Customized Solutions Overview