Hot Bar Soldering System, inline design with 3 working stations.

Adaptation to a Bosch linear transport system.

Transport of product jigs is from left to right with automatic indexing of the carriers.

The products that are placed on the carriers are fluxed in station 1.

A defined amount of flux is applied automatically onto the solder joints in a reliable process.

Flux application is done within a few seconds.

Thus two Hot Bar Soldering stations can follow one flux station.

Both of the two following Hot Bar Soldering Stations are equipped with 1 soldering bar each.

Each soldering bar is controlled separately by the control PLC and, therefore, can be set up differently according to product specifications.

Path sensors at each soldering unit measure the height of the parts and detect the path that the soldering bar sinks into the melting soldering depot.

System is equipped with facilities for communication and data logging (traceability).

Complete project planning, design, construction, installation, commissioning and support.

Hot Bar Soldering System for the integration in a customized production system (rotary index table).

Quadruple flux and Hot Bar Soldering unit.

All units are suspended and controlled separately.

Patented flux applicators are supplied with flux by a pressure tank dispensing system.

The soldering units are equipped with both path and force measuring during the process.

Two soldering heads are equipped with a Kapton foil feeder.

System is a completely independent unit with separate control and communication to the main installation.

Hot Bar Soldering System with sliding table (Desktop-Design).

Product jig on the sliding table.

Dimensions of sliding table: 300x300mm

The workpiece holder can be loaded when the sliding table is withdrawn.

Standard: Manual movement of the sliding table.

Option: Automatic drive.

The table is locked automatically and the Hot Bar Soldering process is initiated

Hot Bar Soldering System (Inline-edition) with two working stations.

Adaptation to a Bosch linear transfer system.

The transport of the jigs is from the left to the right with automatic indexing of the jigs in the stations.

The products placed on the jigs are soldered in two separate stations.

The first Hot Bar Soldering station is equipped with one soldering bar, the second station has two soldering bars.

Each soldering bar is controlled separately and, therefore, can be set depending on different product specifications.

Path sensors on each soldering unit measure the height of the products and detect the sinking paths of the soldering bars into the melting soldering pot.

System is equipped with possibilities for communication and data logging (traceability).