Temperature Control for Dispensing Valves MV-2000.

The through-flow body is equipped with a heating.

The temperature is designed for an area +/-20K starting from room temperature or can be adapted to customer requirements.

A preset temperature is maintained regardless of the ambient temperature of the dispensing valve.

For materials that change their viscosity as a function of temperature, constant conditions for a stable dispensing process are extremely important.

Very robust diaphragm dispensing valve.
Due to its simple design this valve is very easy to handle and simple to maintain.

The membrane is made of Teflon and the through-flow body is made of stainless steel.

The through-flow body is equipped with a heating.

The temperature range can be adapted to customer requirements.

The heating control system monitors and controls the valve set temperature with an accuracy of up to + /-1K.

The valve lift is adjustable and can optionally be monitored by a sensor (dispensing control).

Manual Dispensing Valve with one or two MV-2000.

Ideal e.g. for 2-component high-performance structural adhesives for no-mix method.

Both components are dispensed as one-on-the-other or adjacent beads onto the components to be joined.

During the process, both beads are crumpled together; the curing begins.

Component ratio: 100:100 parts by volume.

The manual pinch valve is ideal for use with reactive materials such as cyanoacrylates and solvent-based products.

The pinch valve is closed in the static condition.

A piston closes the pinch valve via spring force.

Industrial Dispensing Pinch Valve designed for automated dispensing of low and medium viscous fluids.

Hence 2K materials and abrasive liquids can be dispensed.

Manual Cartridge Holder with handle and integrated switch to activate the dispensing signal.