Basic Dispensing Pressure Control for different dispensing valves.

Dispensing Working Place for the applications of adhesives on a rotating lid.

A tank dispensing system supplies a connected dispensing valve with the adhesive to be applied.

The operating personnel places a plastic lid on the turntable and starts the dispensing action via a two-handed release.

The dispensing unit moves onto the product, the plastic lid turns around its own axis and the dispensing action gets started.

A circular adhesive bead is dispensed. The dispensing process is time controlled.

After completing the process the plastic part can be removed and transferred for further processing.

Dispensing system for the application of flux before a further Hot Bar Soldering process.

A special nozzle system ensures a consistent application of flux onto the soldering joint.

The dispensing unit moves onto the product.

Easy- to- clean, low-maintenance flux dispensing system for integration into production lines.

All dispensing nozzles are customized products.

Tank dispensing system with two dispensing valves and a static mixing hose.

The dispensing head is designed to adapt to an axis or robot system for the dispensing of 2-component materials which are dispensed in a static mixing nozzle in a 50/50 rate.

The pressure tanks are designed to accommodate containers of up to half a liter each.

The tank pressure can be adjusted for each tank separately.

A timer is integrated in the separate control device.

This timer controls the pulse duration of the connected dispensing valves.

A wide range of different dispensing valves can be connected to the control device.

Manual Dispensing Valve with dispensing control.

Ideal e.g. for 2-component high-performance structural adhesives for no-mix method.

Both components are dispensed as one-on-the-other or adjacent beads onto the components to be joined.

During the fitting process, both beads are crumpled together; the curing begins.

Component ratio: 100:100 parts by volume.