Standard stand-alone heat staking system with a simple base plate to mount a workpiece holder.
The product to be processed is located by the operator directly in the workpiece holder fitted under the heat staking head and the staking process is started by a pushbutton.
The operating area of the heat staking head is monitored by a light curtain at the housing opening.
If there is any intrusion into the operating area or the light curtain is broken during the staking process, the system switches into the âemergency offâ condition.
All components withing the housing are then isolated from compressed air and from electric voltage. The heat staking unit can be fitted with various single and multiple heat staking heads.
Temporarily heated system, where active cooling of the product takes place after the heating phase.
A Stand-alone system which can be operated f more...
Customized Dispensing Systems - XYZ-Axis-System.
We offer engineering, planning, design and implementation of complete production cells.
Our dispensing components can be integrated into existing production systems or supplied as suitable complete solutions. more...
Customized Dispensing Systems - In-line System with XYZ-Axis-System.
We offer engineering, planning, design and implementation of complete production cells.
Our dispensing components can be integrated into existing production systems or supplied as suitable complete solutions. more...
Soldering of an OLED on a PCB.
Hot Bar Soldering with flat soldering bar.
The positioning of the flex foil on the soldering pads of the PCB is realised with alignment pins and corresponding drillings in flex and PCB. more...
Soldering of a flex foil on a PCB.
Hot Bar Soldering with flat soldering bar.
The positioning of the flex foil on the soldering pads of the PCB is realised with alignment pins and drillings in flex and PCB. more...
Hot Bar Soldering System with sliding table (Desktop-Edition).
With exchangeable base plate on the sliding table for different jigs and workpiece holders. Dimensions of sliding table: 250x250mm.
The workpiece holder can be loaded in the extracted state of the sliding table. Standard: Manual movement of the sliding table.
Option: Automatic drive
The table is locked automatically and the Hot Bar Soldering process is initiated.
The system enclosure is available in different versions (e.g. ESD acryl glass or profile enclosure with safety door).
Semi-gimballed suspension of the soldering bar for best possible co-planar pressure of the soldering bar on the solder joint (for the soldering of plane solder joints).
Precise linear guide for stranded wire- or cable solderings. Adjustable pressure for both options.
Quick-change system for soldering bars with plug-in connector more...
Standard heat sealing system of a larger design and construction to allow integration of additional functions and the use of a turntable up to 500mm diameter for larger components, which cannot be fitted on a smaller turntable.. While the external workpiece holders are being unloaded and re-loaded with new workpieces, , the product within the machine is heat sealed.
In this example, two plastic pins are formed with two separately suspended heat sealing dies. This arrangement is necessary when the maximum size needs to be monitored. In contrast, with a situation involving a multiple heat sealing head, the heat sealing dies can be individually suspended so that the temperature at each sealing position can be controlled and monitored, the component detection and sink depth per pin established and the process force dedicated to each individual heat sealing die can be applied.
Tempor more...
UV irradiation field with 10 high power fluorescent tubes, providing optimum homogenous irradiation.
Radiation surface of around 600mm x 600mm.
Best used in applications requiring low UV intensity demand, eg for the curing of glass adhesives in the glass processing industry.
Separate power supply unit for 230V/50Hz or 115V/60Hz.
Universally applicable, simple fixing to the back of the field. more...
Typical hot caulking head for integration in customersâ production systems. Three heat sealers are simultaneously fed to the product but can each have different operating parameters.
A system for forming thermoplastic components under the action of heat and force e.g for fixing circuit boards in plastic bases or for plastic-plastic deformation.
Thermoplastic materials such as PA, PP, PBT, POM, PC and PE (also with glass fibre content) are caulked.
High precision temperature control using the pulse heat process. Connectivity for up to 3 single- or multiple heat sealers.
Pneumatic feed of the sealer onto the product. The heat sealers are double temperature monitored and the smallest temperature irregularity is automatically identified by the system. The hot caulking system can be fitted with integral force and path measurement. Sealers are not subject to contamination and more...
Needle Dispensing Valve NV-2000 for dispensing liquids and pastes.
Small quantities can be dispensed with high accuracy.
Very robust needle dispensing valve for precise dispensing of low and medium viscous fluids.
Pneumatic control of the needle travel.
The needle and the through-flow body are made of stainless steel.
The through-flow body is equipped with heating.
The temperature range can be adjusted depending on the application.
The valve lift is adjustable and can optionally be monitored by a sensor (dispensing control). more...
Hot Bar Soldering System for the integration in a customized production system (rotary index table).
Quadruple flux and Hot Bar Soldering unit.
All units are suspended and controlled separately.
Patented flux applicators are supplied with flux by a pressure tank dispensing system.
The soldering units are equipped with both path and force measuring during the process.
Two soldering heads are equipped with a Kapton foil feeder.
System is a completely independent unit with separate control and communication to the main installation. more...
250W point emitter system with focused optics and shutter.
UV-P 250C is a point emitter, which functions without the need of an optic cable.
The UV radiation generated in the device is reflected by a concave mirror and focused by a lens system and projected onto the surface to be irradiated.
This system generates a high intensity UV output.
It is best suited for applications with irradiation surfaces up to 30mm.
The radiation outlet can, optionally, be fitted with a pneumatic shutter/aperture and the shutter is released by a controller provided by the customer.
The housing can be flexibly retrofitted into existing plant or can be fixed to an optional tripod. more...
High power UV irradiation field with 8 high power, 200W fluorescent tubes, providing optimum homogenous irradiation.
Radiation surface of around 2000mm x 800mm.
Best used in applications requiring low UV intensity demand, eg for the curing of glass adhesives in the glass processing industry. Separate power supply unit for 230V/50Hz.
Universally applicable, simple fixing to the back of the field or to an optional tripod system. more...
Cost-effective standard instrument for universal application.
Different UV spectra are possible (eg UV-A or UV-C) Cost-effective lamps or replacement emitters.
Simple time control or connection to SPS. more...
250W point emitter system with focused optics.
UV-P 250C is a point emitter, which functions without the need of an optic cable.
The UV radiation generated in the device is reflected by a concave mirror and focused by a lens system and projected onto the surface to be irradiated.
This system generates a high intensity UV output.
It is best suited for applications with irradiation surfaces up to 30mm.
The radiation outlet can, optionally, be fitted with a pneumatic shutter/aperture and the shutter is released by a controller provided by the customer.
The housing can be flexibly retrofitted into existing plant or can be fixed to an optional tripod.
The integral lens system is designed for all UV wavelengths and, optionally, an additional filter (eg for black light) can be fitted in the optics. more...
A UV-F 450, 450W large surface emitter in a large lightbox with a manually operated shutter.
The door of the box can be opened only when the shutter is closed preventing radiation from entering the chamber. When the shutter is open, the door is locked.
No mains supply voltage is necessary for the lightbox and the UV emitter has a separate power supply.
Adaptor plates are available to fix different UV emitters, such as hand lamps, UV-F 450 or specific customer instruments. more...
Soldering of a flex foil on an aluminium oxide PCB.
Hot Bar Soldering with flat soldering bar.
The positioning of the flex foil on the soldering pads of the PCB is realised with alignment pins and corresponding drillings in flex and PCB. more...
The plastic domes fed through the circuit board are formed into a rivet by the die, so that the circuit board is fixed in the plastic part.
Thermoplastic materials such as PA, PP, PBT, POM, PC and PE (also with glass fibre content) are caulked.
The heat required for the process is introduced into the plastic via pulse-heated dies.
Under the action of the necessary application force, the components are positively and firmly bonded.
The die(s) are moved to the product via a pneumatic shaft and the necessary process force is generated via spring elements.
According to the application, the heating of the die takes place before or during the contact with the product.
On completion of the fusing process, the die is lifted from the fusing point. Depending on the plastic used, the die can also be cooled before it is lifted.
All relevant process parameters, such as temperature, force a more...
Multiple Dispensing Nozzles with a Dispensing Valve MV-1000.
Multiple Dispensing Nozzles are equipped with a variety of separate dispensing needles.
The needles are arranged according to product-specific geometries.
Complex dispensing tasks can be solved in a short time.
Greater amounts of material can be applied quickly.
Multiple dispensing nozzles are used for static dispensing tasks i.e. recurring shapes. more...
Small surface UV emitter with an integral shutter system and small irradiation chamber.
Particularly well-suited for irradiating small rectangular surfaces.
Height-adjustable loading plate.
The integrated shutter is pneumatically operated and opened and shut in a timed manner by means of the integrated timer.
Standard 250W emitters with all popular spectra can be used. more...
Deutsch
English
Standard-Systems
