Multiple Dispensing Nozzles are equipped with a variety of separate dispensing needles.
The needles are arranged according to product-specific geometries.
Complex dispensing tasks can be solved in a short time.
Greater amounts of material can be applied quickly.
Multiple dispensing nozzles are used for static dispensing tasks i.e. recurring shapes.
Different types of needles with different cross sections can be used for every multiple dispensing nozzle. more...
Soldering of a ribbon cable on an aluminium oxide PCB.
Use of a profiled soldering bar for the optimal positioning of the stranded wires to the soldering pads and for an improved heat input compared to a flat soldering bar.
The profiling of the soldering bar is product-specific and, therefore, can be adapted to the respective wire cross section. There is an open choice of the number of profilings.
Profilings can be of different shapes and sizes. Thus conductors with different cross sections can be soldered in just one process step. more...
Heat staking system with a four-stage circular indexing table to allow the integration of additional process-relevant functions such as AOI( Automatic Optical Inspection), product handling etc. Turntable (500mm diameter) drive can be electrical or pneumatic and it is fitted with four workpiece holders.
Temporarily heated system, where active cooling of the product takes place after the heating phase.
A Stand-alone system which can be operated from a standing or sitting operating position
Custom-built systems and special machines are designed, manufactured, tested and commissioned for operation in our factory. We carry out all the manufacturing stages required for the heat staking process. Beginning with the original design and conception of the workpiece holder right up to the connection of the system control to the customerâs traceability system.
We can meet customer more...
Hot Bar Soldering System with rotary table ("Desktop"-Edition).
On the turntable of the system there are two product jigs.
Diameter of turntable: 300mm.
Simultaneous loading / unloading and soldering.
Turntable can be turned manually.
Option: Automatic drive.
Soldering bar with Kapton foil feeder.
A basic camera system supports the operator when inserting the products into the jig. more...
Typical application with a double heat staking head. Linear arrangement of two forming elements.
Standard heat staking system with pneumatically driven turntable (330mm diameter), fitted with two component holders. During the time that the outside workpiece carriers are being unloaded and loaded, the product located in the system is sealed.
Temporarily heated system, where active cooling of the product takes place after the heating phase.
A Stand-alone system which can be operated from a standing or sitting operating position.
The HVS 40i is quoted by us as a âmodularâ system. Consequently, we can meet customer functional specifications from simple systems, which are purely thermally monitored, to completely process-monitored expansion sections with component raised- and lowered-distance measurement, permanent force measurement and data communication.
The relevan more...
Heat seal applications Heat Sealing/ Heat seal application Flex (FPC) to glass (LCD) and Heat seal-/ Heat seal application circuit board (PCB) to flex (FPC) to glass(LCD) more...
The manual pinch valve is ideal for use with reactive materials such as cyanoacrylates and solvent-based products.
The pinch valve is closed in the static condition.
A piston closes the pinch valve via spring force. more...
Standard warm or hot caulking system HVS40i. A stand-alone system with a turntable with two workstations. A system for forming thermoplastic components under the action of heat and force e.g for fixing circuit boards in plastic bases or for plastic-plastic deformation.
Thermoplastic materials such as PA, PP, PBT, POM, PC and PE (also with glass fibre content) are caulked.
High precision temperature control using the pulse heat process. Connectivity for up to 3 single- or multiple heat sealers.
Pneumatic feed of the sealer onto the product. The heat sealers are double temperature monitored and the smallest temperature irregularity is automatically identified by the system. The hot caulking system can be fitted with integral force and path measurement. Sealers are not subject to contamination and can be coated to withstand mechanical wear, especially for applications using glass-f more...
Double tank system with two 6bar pressure vessels.
Ideal for dispensing of 2-component materials, which are dosed in the 50/50 ratio with a static mixing nozzle.
The pressure vessels are each designed to accommodate containers up to six liters.
The necessary pressure of each pressure vessel can be separately set.
An integrated timer controls the pulse duration of the attached dispensing valve.
Optional fill level sensors and tank pressure sensors can be integrated.
Different dispensing valves can be controlled by the tank system. more...
Example for construction of a Hot Bar Soldering system for the integration into a rotary table system.
2 double stations for flux application and two double Hot Bar Soldering stations. more...
Temperature Control for Dispensing Valves MV-2000.
The through-flow body is equipped with a heating.
The temperature is designed for an area +/-20K starting from room temperature or can be adapted to customer requirements.
A preset temperature is maintained regardless of the ambient temperature of the dispensing valve.
For materials that change their viscosity as a function of temperature, constant conditions for a stable dispensing process are extremely important. more...
Multiple Dispensing Nozzles are equipped with a variety of separate dispensing needles.
The needles are arranged according to product-specific geometries.
Complex dispensing tasks can be carried out in a short time.
Large amounts of material can be applied quickly.
Multiple dispensing nozzles are used for static dispensing tasks i.e. recurring shapes.
Different types of needles with different cross sections can be used for every multiple dispensing nozzle. more...
Large area Heat Seal System. A system for large area heat sealing- and lamination processes up to 200x200mm. Temperature range 50-300ºC, application force up to 15,000N. A large surface heating head with multiple temperature monitoring and optimum thermal homogeneity at the heating head. The transfer table system is equipped with a customised workpiece carrier. To absorb the high forces necessary in the process, the transfer table is fitted with a high load linear guide. There is integrated precision temperature control, timing control and protection and monitoring. more...
Heat seal applications Heat Sealing/ Heat seal application Flex (FPC) to glass (LCD) and Heat seal-/ Heat seal application circuit board (PCB) to flex (FPC) to glass(LCD) more...
Heat staking application for fixing a circuit board in a plastic body.
The circuit board is located in an injection moulding part with prepared parts.
The plastic domes fed through the circuit board are formed into a rivet by the die, so that the circuit board is fixed in the plastic part.
Thermoplastic materials such as PA, PP, PBT, POM, PC and PE (also with glass fibre content) are caulked. more...
Soldering of an OLED on a PCB.
Hot Bar Soldering with flat soldering bar.
The positioning of the flex foil on the soldering pads of the PCB is realised with alignment pins and corresponding drillings in flex and PCB. more...
Product jig for the soldering of stranded wires.
Different supports can be mounted on the basic construction with an XY- stage.
Clamping device for the cable. more...
Soldering of an LCD on a PCB.
Hot Bar Soldering with flat soldering bar.
The positioning of the flex foil on the soldering pads of the PCB is realised with alignment pins and corresponding drillings in flex and PCB. more...
Product jig with assembly fixture for the soldering of an LCD-connection flex on a PCB.
Placing in of the PCB and the display, adjusting of the flex in x-axis and then Hot Bar Soldering of the connection. more...
Drawer/Irradiation chamber with four 450W emitters.
The internal base plate can be inserted into the lateral guides at different heights.
The drawer base is loaded with the products to be irradiated and the door is closed and locked and the irradiation started.
The integral UV emitter is fitted with a shutter.
Only after the door is closed and locked can radiation be emitted following the automatic opening of the shutter system.
Should the door be forcibly opened during irradiation, the UV emitter is automatically switched off.
There is an integral power-monitoring UV sensor and if the measured UV output falls below a set value, an alarm is generated.
The system has a small SPS with a display. The required irradiation time can be set and the time already expired is displayed.
There is also a permanently running operating hours clock and an operating hours clock more...
Deutsch
English
Standard-Systems
